Copyright: Tuesday, April 17, 2001 04:11:54


Provides a place for you to type a control code that is sent to the printer at the beginning of a print job. For example, you can enter a reset control code, which will configure a printer to your requirements before you send any documents to it.

If your printer’s operating manual specifies control codes using hexadecimal (base 16) numbers, enter them directly enclosed by angle brackets. See Using printer control codes in Printing help for examples of some common control codes and their hexadecimal equivalents.

For more information, see your printer’s operating manual.


Provides a place for you to type a control code that is sent to the printer at the end of a print job. You can use this control code to reset a printer to its default mode at the end of a print job.

If your printer’s operating manual specifies control codes using hexadecimal (base 16) numbers, enter them directly enclosed by angle brackets. See Using printer control codes in Printing help for examples of some common control codes and their hexadecimal equivalents.

For more information, see your printer’s operating manual.


Provides a place for you to type a control code that notifies the printer of the paper size you want to use.

If your printer’s operating manual specifies control codes using hexadecimal (base 16) numbers, enter them directly enclosed by angle brackets. See Using printer control codes in Printing help for examples of some common control codes and their hexadecimal equivalents.

For more information, see your printer’s operating manual.


Provides a place for you to type a control code that notifies the printer which tray or paper source to use for printing.

If your printer’s operating manual specifies control codes using hexadecimal (base 16) numbers, enter them directly enclosed by angle brackets. See Using printer control codes in Printing help for examples of some common control codes and their hexadecimal equivalents.

For more information, see your printer’s operating manual.


Specifies the margin at the top of the page.


Specifies the margin at the bottom of the page.


Specifies the margin at the right side of the page.


Specifies the margin at the left side of the page.


Specifies that you are using millimeters (one tenth of a millimeter) as the unit of measurement.


Specifies that you are using inches (1/100 of an inch) as the unit of measurement.


Converts the Windows character set to the code page character set you have selected for printing.


Provides a place for you to type the font select control code for 10 characters per inch as it is described in your printer manual.

If your printer’s operating manual specifies control codes using hexadecimal (base 16) numbers, enter them directly enclosed by angle brackets. See Using printer control codes in Printing help for examples of some common control codes and their hexadecimal equivalents.

For more information, see your printer’s operating manual.


Provides a place for you to type the font select control code for 12 characters per inch as it is described in your printer manual.

If your printer’s operating manual specifies control codes using hexadecimal (base 16) numbers, enter them directly enclosed by angle brackets. See Using printer control codes in Printing help for examples of some common control codes and their hexadecimal equivalents.

For more information, see your printer’s operating manual.


Provides a place for you to type the font select control code for 17 characters per inch as it is described in your printer manual.

If your printer’s operating manual specifies control codes using hexadecimal (base 16) numbers, enter them directly enclosed by angle brackets. See Using printer control codes in Printing help for examples of some common control codes and their hexadecimal equivalents.

For more information, see your printer’s operating manual.


Provides a place for you to type the control code to start bold text printing as it is described in your printer manual. Your printer must support bold text printing to use this feature.

If your printer’s operating manual specifies control codes using hexadecimal (base 16) numbers, enter them directly enclosed by angle brackets. See Using printer control codes in Printing help for examples of some common control codes and their hexadecimal equivalents.

For more information, see your printer’s operating manual.


Provides a place for you to type the control code to stop bold text printing as it is described in your printer manual. Your printer must support bold text printing, and you must have entered the control code for Bold On to use this feature.

If your printer’s operating manual specifies control codes using hexadecimal (base 16) numbers, enter them directly enclosed by angle brackets. See Using printer control codes in Printing help for examples of some common control codes and their hexadecimal equivalents.

For more information, see your printer’s operating manual.


Provides a place for you to type the control code to start font underlining as it is described in your printer manual. Your printer must support font underlining to use this feature.

If your printer’s operating manual specifies control codes using hexadecimal (base 16) numbers, enter them directly enclosed by angle brackets. See Using printer control codes in Printing help for examples of some common control codes and their hexadecimal equivalents.

For more information, see your printer’s operating manual.


Provides a place for you to type the control code to stop font underlining as it is described in your printer manual. Your printer must support font underlining, and you must have entered the control code for Underline On to use this feature.

If your printer’s operating manual specifies control codes using hexadecimal (base 16) numbers, enter them directly enclosed by angle brackets. See Using printer control codes in Printing help for examples of some common control codes and their hexadecimal equivalents.

For more information, see your printer’s operating manual.